Shop Table DIY | Workbench Heavy Duty 4x4 Corner Brackets for 4 x 4 Posts | Made

Description

Use these brackets to build your own Shop Table, Garage Workbench, CNC Table, Backyard Deck, Gazebo or Pergola.
Made with Heavy Duty 12-gauge steel, almost 1/8” thick, made in the USA, with USA Made Steel!
Mounting holes sized to be installed using 1/2" lag screws or 1/2" bolts. You can also weld the brackets if you want to build your table out of metal supports. Mounting hardware is not included.
We can also make custom brackets for your project, just shoot us a message with a diagram and quantity of what you are needing, and we will give you a quote.
Brackets we offer:
Corner Brackets – Designed to fit over standard 4 x 4 posts. (Actual wood dimensions of a 4x4 post are 3.5” x 3.5”) Our brackets are 14” x 7”, they are then bent at a 90-degree angle to fit over the 4x4 posts. The top legs contain three (3) holes each for attaching to the cross members and four holes on the bottom leg (2 on each side) for mounting to the leg. (Note: The leg holes are offset):
Flat T brackets –A T shape Flat Bracket to add strength to a joint:
Bent L’s – A bracket bent at 90 degrees to use where you want to add strength to an inside corner:
Flat L’s - Flat L shaped bracket, used to add strength to an outside joint.
Double Inside Corner – Like the Bent L but used where there is a need to add strength to an inside corner.
Two Piece Post Base – Designed to fit over a post to provide anchor points to anchor to a base. Made up of two separate halves with feet on all four sides. Used to mount and secure your posts to a wood deck, or concrete floor. If you want to mount your post next to a wall, you can use ½ of the 2 piece post base to mount it flush to the wall.
Note: Our brackets are made from 12-gauge USA Made Steel almost 1/8” Thick. They may contain scratches and marks and are shipped in their raw steel form unless you choose for us to powder coat them. If left raw steel as they are shipped, they will rust and get a natural patina if not painted or treated. Do it Yourself Workbench, Do it Yourself Shop Table, DIY Workbench, DIY Shop Table
Materials: Metal